A company’s purchasing department negotiates all of the purchasing contracts for raw materials. Which variance is most useful in assessing the performance of the purchasing department?
A. Materials quantity variance
B. Materials price variance
C. Labor rate variance
D. Labor efficiency variance
Myles Company budgeted 10,500 pounds of direct materials costing $23.50 per pound to make 5,300 units of product. The company actually purchased 11,000 pounds of direct materials costing $25 per pound to make the 5,300 units. What is the direct materials price variance?
A. $16,500 favorable
B. $16,500 unfavorable
C. $15,750 unfavorable
D. $15,750 favorable
A company produced 2,200 units of output during a production process that normally requires 2 hours of labor per unit of output. The standard labor rate is $16 per hour, but the company paid $15 per hour. Actual hours needed to complete the production process were 4,600. How much was the labor rate variance?
A. $4,400 favorable
B. $4,400 unfavorable
C. $4,600 favorable
D. $4,600 unfavorable
How is the variable manufacturing overhead efficiency variance calculated?
A. The difference between the actual overhead rate and the standard overhead rate multiplied by the standard overhead rate
B. The difference between the standard hours allowed and the actual hours used multiplied by the standard overhead rate
C. The difference between the standard hours allowed and the actual hours used
D. The difference between the standard hours allowed and the actual hours used multiplied by the actual overhead rate
Kahn Performance Nutrition produces a protein shake that contains whey protein as one of its ingredients. The whey protein (materials) standards for each batch of protein shake produced are 12 pounds of whey protein at a standard cost of $3 per pound. During July, Kahn Performance Nutrition purchased and used 54,000 pounds of whey protein at a total of $170,000 to make a total of 4,300 batches of protein shake. What is the materials quantity variance for whey protein in July?
A. $7,200 unfavorable
B. $7,200 favorable
C. $141,900 favorable
D. $141,900 unfavorable
A(n) ________ is a carefully predetermined cost that is usually expressed on a per unit basis.
A. allocated cost
B. applied cost
C. standard cost
D. flexible cost
The direct labor price variance was unfavorable and much greater than anticipated. Who would be in the best position to explain why the unfavorable variance occurred?
A. Both the production and human resource supervisors
B. The production supervisor
C. The purchasing manager
D. Both the purchasing manager and production supervisor
Capital Manufacturing designs and manufactures bathtubs for home and commercial applications. Capital recorded the following data for its commercial bathtub production line during the month of March.
Standard DL hours per tub 3
Standard overhead rate per DL hour $6.50
Standard overhead cost per unit $19.50
Actual overhead costs $22,750
Actual DL hours 3,250
Actual overhead cost per machine hour $7.00
Actual tubs produced 1,100
What is the variable manufacturing overhead efficiency variance for March?
A. $1,625 unfavorable
B. $325 unfavorable
C. $1,625 favorable
D. $325 favorable
Which of the following formulas is used to compute variable overhead rate (or spending) variance?
A. Actual hours x (actual rate – standard rate)
B. Standard hours allowed x (actual rate – standard rate)
C. Actual rate x (actual hours – standard hours allowed)
D. Standard rate x (actual hours – standard hours allowed)
A manager purchased better quality materials for a slightly higher cost than anticipated. However, as a result, there was less spoilage than normal. What is the effect on the price and quantity variances respectively?
A. Favorable, favorable
B. Favorable, unfavorable
C. Unfavorable, favorable
D. Unfavorable, unfavorable
The two fixed overhead variances are the:
A. budget and volume variances.
B. rate and efficiency variances.
C. price and usage variances.
D. rate and volume variances.
Which of the following is NOT an advantage of using standard costs and variances?
A. Use as a performance benchmark for evaluation of actual costs
B. Use as a basis for components of the master budget
C. Simplification of bookkeeping
D. Change in behavior of managers to obtain desired variances
The following information describes a company’s usage of direct labor in a recent period.
Actual direct labor hours used 34,000
Actual rate per hour $17.00
Standard rate per hour $16.75
Standard hours for units produced 33,500
How much is the direct labor rate variance?
A. $8,375 favorable
B. $8,500 favorable
C. $8,375 unfavorable
D. $8,500 unfavorable
How is the direct labor efficiency variance calculated?
A. The difference between the standard labor hours allowed and the actual labor hours used multiplied by the actual labor rate
B. The difference between the standard labor hours allowed and the actual labor hours used multiplied by the standard labor rate
C. The difference between the standard labor hours and the actual labor hours used
D. The difference between the standard labor rate and the actual labor rate
A company uses a single raw material in its production process. The standard price for a unit of material is $2. During the month the company purchased and used 600 units of this material at a price of $2.25 per unit. The standard quantity required per finished product is 2 units, and during the month the company produced 310 finished units. How much was the material quantity variance?
A. $40 favorable
B. $40 unfavorable
C. $45 favorable
D. $45 unfavorable
Active Lifestyle Beverages gathered the following information for Job #928.
Standard Total Cost Actual Total Cost
Standard: 540 hours at $6.75/hr. 3,645
Actual: 500 hours at $6.50/hr. 3,250
What is the direct labor efficiency variance?
A. $260 favorable
B. $260 unfavorable
C. $270 favorable
D. $270 unfavorable
Which term below is best paired with “The difference between the actual overhead cost incurred and the flexible budget amount of overhead cost for actual number of output”?
A. Sales volume variance
B. Flexible budget
C. Overhead flexible budget variance
Jackson Industries has collected the following data for one of its products.
Direct materials standard (6 pounds per unit @ $0.55/lb.) $3.30 per finished good
Direct materials flexible budget variance-unfavorable $12,000
Actual direct materials used 35,000 pounds
Actual finished goods produced 26,000 units
What is the total actual cost of the direct materials used?
The entry to allocate manufacturing overhead costs to production involves which of the following?
A. Debit to work-in-process inventory for the actual cost of overhead
B. Credit to work-in-process inventory for the standard rate of overhead times the standard quantity of the allocation base allowed for actual output
C. Credit to work-in-process inventory for the actual cost of overhead
D. Debit to work-in-process inventory for the standard rate of overhead times the standard quantity of the allocation base allowed for actual output
All of the following are advantages of using standard costs EXCEPT:
A. managers can evaluate the efficiency of production workers.
B. differences between the static budget and the flexible budget can be broken down into price and quantity components.
C. consumer motivation for purchases can be analyzed.
D. standard costing allows companies to create flexible budgets.
The internal rate of return is:
A. the interest rate at which the net present value of the investment equals the cost of the investment.
B. the interest rate at which the net present value of the investment exceeds the company’s desired rate of return.
C. equal to the accounting rate of return.
D. None of the above
The following are all methods of analyzing capital investments EXCEPT:
A. payback period.
B. regression analysis.
C. net present value (NPV).
D. accounting rate of return (ARR).
The Warren Company is considering investing in two alternative projects.
Project 1 Project 2
Investment $400,000 $250,000
Useful life (years) 5 6
Estimated annual net cash inflows for useful life $100,000 $45,000
Residual value $25,000 $15,000
Depreciation method Straight-line Straight-line
Required rate of return 12% 8%
What is the accounting rate of return for Project 2?
Mulheim Corporation is deciding whether to automate one phase of its production process. The equipment has a 6-year life and will cost $410,000. Projected net cash inflows from the equipment are as follows.
Year 1 $120,000
Year 2 $100,000
Year 3 $110,000
Year 4 $100,000
Year 5 $95,000
Year 6 $90,000
Mulheim Corporation’s hurdle rate is 12%. Assume the residual value is zero.
What is the net present value of the equipment?
All else being equal, a company would choose to invest in a capital asset if which of the following is true?
A. If the payback period equals the amount invested
B. If the expected accounting rate of return is less than the required rate of return
C. If the expected accounting rate of return is greater than the required rate of return
D. If the average amount invested is equal to the net cash inflows
Which of the following areas does NOT make significant use of time value of money concepts?
A. Capital investment analysis
B. Lending and borrowing
C. Personal finance planning
D. Marketing research
Which of the following decision rules is a correct statement?
A. If the net present value is positive, do not invest in the capital asset.
B. If the internal rate of return is less than the required rate of return, invest in the asset.
C. Investments with longer payback periods are more desirable, all else being equal.
D. If the net present value is positive, invest in the capital asset.
Smith & Cramer Computer Repair is considering an investment in computer and network equipment costing $254,000. This equipment would allow them to offer new programming services to clients. The equipment will be depreciated on the straight-line basis over an 8-year period with an estimated residual value of $60,000. Using the accounting rate of return model, what is the minimum average annual operating income that must be generated from this investment in order to achieve an 11% accounting rate of return?
Siesta Manufacturing has asked you to evaluate a capital investment project. The project will require an initial investment of $88,000. The life of the investment is 7 years with a residual value of $4,000. If the project produces net annual cash inflows of $16,000, what is the accounting rate of return?
“Management’s minimum desired rate of return on an investment” is best described by which of the following terms?
A. Payback return
B. Internal rate of return
C. Discount rate
D. Net present value
Assuming an interest rate of 6%, the present value of $22,000 to be received 9 years from now would be closest to:
A manager wants to know which investment decision will affect the bottom line of the financial statements according to Generally Accepted Accounting Principles. Which capital budgeting method would he choose?
A. Payback method
B. Accounting rate of return method
C. Net present value method
D. Profitability index
Mantua Motors is evaluating a capital investment opportunity. This project would require an initial investment of $38,000 to purchase equipment. The equipment will have a residual value at the end of its life of $3,000. The useful life of the equipment is 5 years. The new project is expected to generate additional net cash inflows of $12,000 per year for each of the 5 years. Mantua Motors’ required rate of return is 14%. The net present value of this project is closest to:
Which of the following is NOT a factor when considering the time value of money?
A. The interest rate
B. The principal amount
C. The payback period
D. The number of periods
You win the lottery and must decide how to take the payout. Use an 8% discount rate. What is the present value of $15,000 a year received at the end of each of the next 6 years?
The term ________ is best described as “a stream of equal periodic payments.”
A. “time value of money”
B. “capital budgeting”
D. “payback period”
Hincapie Manufacturing is evaluating investing in a new metal stamping machine costing $30,924. Hincapie estimates that it will realize $12,000 in annual cash inflows for each year of the machine’s 3-year useful life. The internal rate of return (IRR) for the machine is approximately:
What is an attribute of the internal rate of return?
A. It is the interest rate that makes the NPV of the investment equal to zero.
B. It is the interest rate that makes the cost of the investment equal to the present value of the investment’s net cash inflows.
C. It is used in the capital rationing process.
D. All of the above are attributes of the internal rate of return.
Eagle Corporation is considering the purchase of a new machine. The machine costs $550,000 and will generate an annual net cash inflow of $100,000. What is the payback period?
A. 4 years and 6 months
B. 5 years
C. 5 years and 6 months
D. 6 years and 1 month
Which of the following capital decision methods uses accrual accounting, rather than net cash flows, as a basis for calculations?
A. Payback method
B. Internal rate of return
C. Net present value
D. Accounting rate of return
Why Work with Us
Top Quality and Well-Researched Papers
We always make sure that writers follow all your instructions precisely. You can choose your academic level: high school, college/university or professional, and we will assign a writer who has a respective degree.
Professional and Experienced Academic Writers
We have a team of professional writers with experience in academic and business writing. Many are native speakers and able to perform any task for which you need help.
Free Unlimited Revisions
If you think we missed something, send your order for a free revision. You have 10 days to submit the order for review after you have received the final document. You can do this yourself after logging into your personal account or by contacting our support.
Prompt Delivery and 100% Money-Back-Guarantee
All papers are always delivered on time. In case we need more time to master your paper, we may contact you regarding the deadline extension. In case you cannot provide us with more time, a 100% refund is guaranteed.
Original & Confidential
We use several writing tools checks to ensure that all documents you receive are free from plagiarism. Our editors carefully review all quotations in the text. We also promise maximum confidentiality in all of our services.
24/7 Customer Support
Our support agents are available 24 hours a day 7 days a week and committed to providing you with the best customer experience. Get in touch whenever you need any assistance.
Try it now!
How it works?
Follow these simple steps to get your paper done
Place your order
Fill in the order form and provide all details of your assignment.
Proceed with the payment
Choose the payment system that suits you most.
Receive the final file
Once your paper is ready, we will email it to you.
No need to work on your paper at night. Sleep tight, we will cover your back. We offer all kinds of writing services.
No matter what kind of academic paper you need and how urgent you need it, you are welcome to choose your academic level and the type of your paper at an affordable price. We take care of all your paper needs and give a 24/7 customer care support system.
Admission Essays & Business Writing Help
An admission essay is an essay or other written statement by a candidate, often a potential student enrolling in a college, university, or graduate school. You can be rest assurred that through our service we will write the best admission essay for you.
Our academic writers and editors make the necessary changes to your paper so that it is polished. We also format your document by correctly quoting the sources and creating reference lists in the formats APA, Harvard, MLA, Chicago / Turabian.
If you think your paper could be improved, you can request a review. In this case, your paper will be checked by the writer or assigned to an editor. You can use this option as many times as you see fit. This is free because we want you to be completely satisfied with the service offered.